0 comments / Posted on by Jinchun Qian

Spinning rod and gun hadle fishing rod ‘s cast tips

 

At the casting fishing rod before , according to the fishing lures’ weight Adjust the wire outlet damping knob

  • Adjust the reel outlet damping knob according to the weight of fishing lures before throwing,Slightly tighten or loosen the wire outlet damping knob. The adjustment criterion is: when the fast throw button is pressed, the road is slowly lowered. When the road touches the ground, the wire wheel stops rotating for the best. In addition, if you use a drip wheel with a centrifugal brake or a magnetic brake, it is recommended to adjust to the maximum value first. First, ask for a smooth and non-explosive line as the primary goal, and then gradually relax after familiar operation.

  •  Note that fishing lures and the fishing rod need to leave a space of 5~10cm. It is too long to be thrown and easy to hook to the obstacle. Too short will damage the fishing rod.

  • Press the fast throw button and press the reel with the thumb to turn the reel 90 degrees (the rocker arm is up, perpendicular to the ground). The picture on the left is the wrong way for most people to hold.

  • Before throwing, please make sure there are no pedestrians and obstacles on the left, right and rear. You can do it several times in the direction of 1 o'clock in the future, and then try to move in the direction of 10 o'clock, and then from 1 o'clock to 10 o'clock. At the o'clock, stop and release the thumb, and throw the road out along the fishing rod's elasticity; when Luya falls into the water, press the wheel with the thumb to avoid the line.

  • The next step is to scroll the reel to start the line, and the quick throw button will automatically bounce on the first lap.

  • If it is not accidentally disconnected, it doesn't matter, as long as it is not very serious, try to pull out the fishing line that has been messed up. If you can't pull out the resistance, you can reverse the reel and relax the stuck line to pull the line out. When you re-enter the line, pull the line and take it into the reel.

Second, the throwing skill of the spinning wheel and the straight shank

 

(1) Note that fishing lures and the fishing rod need to leave a space of 5~10cm. It is too long to be thrown and easy to hook to the obstacle. Too short will damage the fishing rod.

 

(2) First hook the fishing line with the index finger, open the wire gauge to the position, swing the arm backwards, and prepare to throw.

 

 

(3) Before throwing, please confirm that there are no pedestrians and obstacles on the left, right and rear. You can do a few times in the direction of 1 o'clock in the future, and then try to move in the direction of 10 o'clock, and then from 1 o'clock. The clock stopped at 10 o'clock and let go of the index finger, throwing fishing lures along the fishing rod's elasticity.

(4) After throwing the line, hold it slightly with your left hand to avoid the line being too fast and the excessive busbars falling.

(5) After fishing lures falls into the water, scroll the rocker arm and the wire gauge will rebound, and the bait can be collected.

 

Third, the fishing bait skill

 

After all, fishing lures is a kind of bait fishing method. In addition to the emulation of fishing lures' appearance, it is necessary to attract fish through hooks such as color, light, swimming shape and sound. How to make fishing lures' life alive, you must achieve the effect of "fake the real thing" by means of delicate bait, so that it is not difficult to lure the fish.

 

1, Pause

 

In order to let bait sink to the expected depth of the fishing shed and lure the fish in the swimming layer, it is necessary to wait for Luya to reach the proper position in a calm and sinking manner. In the process of sinking bait, it is still possible to mix short twitching, shaking, etc., mimicking the creature that sinks and trembles while injured.

 

2, Twitch

 

This action mimics the subtle movements of the bait creature with tiny dithering techniques. For example, if the fish and fry are not under the pressure of natural enemies, the movements that move, move, or fish like shrimps and tigers always advance in a jumping manner. In operation, do not make excessive movements by shaking the tip or short distance (about 5 to 10 cm).

 

3, Jerk

 

When Luya arrives at the target fish swimming layer in the form of stagnation bait, if the sudden bait is used to collect the bait, it will often attract the assault of the target fish. This is because during the feeding process, it fully expresses the small fish discovery. After the big fish, rushed and nervously escaped. The other is the regular bait mode, which is suitable for simulating small rolls, small pumps or some swimming, stopping creatures, and their "intermittent" strokes.

Spinning rod and gun hadle fishing rod ‘s cast tips

 

At the casting fishing rod before , according to the fishing lures’ weight Adjust the wire outlet damping knob

  • Adjust the reel outlet damping knob according to the weight of fishing lures before throwing,Slightly tighten or loosen the wire outlet damping knob. The adjustment criterion is: when the fast throw button is pressed, the road is slowly lowered. When the road touches the ground, the wire wheel stops rotating for the best. In addition, if you use a drip wheel with a centrifugal brake or a magnetic brake, it is recommended to adjust to the maximum value first. First, ask for a smooth and non-explosive line as the primary goal, and then gradually relax after familiar operation.

  •  Note that fishing lures and the fishing rod need to leave a space of 5~10cm. It is too long to be thrown and easy to hook to the obstacle. Too short will damage the fishing rod.

  • Press the fast throw button and press the reel with the thumb to turn the reel 90 degrees (the rocker arm is up, perpendicular to the ground). The picture on the left is the wrong way for most people to hold.

  • Before throwing, please make sure there are no pedestrians and obstacles on the left, right and rear. You can do it several times in the direction of 1 o'clock in the future, and then try to move in the direction of 10 o'clock, and then from 1 o'clock to 10 o'clock. At the o'clock, stop and release the thumb, and throw the road out along the fishing rod's elasticity; when Luya falls into the water, press the wheel with the thumb to avoid the line.

  • The next step is to scroll the reel to start the line, and the quick throw button will automatically bounce on the first lap.

  • If it is not accidentally disconnected, it doesn't matter, as long as it is not very serious, try to pull out the fishing line that has been messed up. If you can't pull out the resistance, you can reverse the reel and relax the stuck line to pull the line out. When you re-enter the line, pull the line and take it into the reel.

Second, the throwing skill of the spinning wheel and the straight shank

 

(1) Note that fishing lures and the fishing rod need to leave a space of 5~10cm. It is too long to be thrown and easy to hook to the obstacle. Too short will damage the fishing rod.

 

(2) First hook the fishing line with the index finger, open the wire gauge to the position, swing the arm backwards, and prepare to throw.

 

 

(3) Before throwing, please confirm that there are no pedestrians and obstacles on the left, right and rear. You can do a few times in the direction of 1 o'clock in the future, and then try to move in the direction of 10 o'clock, and then from 1 o'clock. The clock stopped at 10 o'clock and let go of the index finger, throwing fishing lures along the fishing rod's elasticity.

(4) After throwing the line, hold it slightly with your left hand to avoid the line being too fast and the excessive busbars falling.

(5) After fishing lures falls into the water, scroll the rocker arm and the wire gauge will rebound, and the bait can be collected.

 

Third, the fishing bait skill

 

After all, fishing lures is a kind of bait fishing method. In addition to the emulation of fishing lures' appearance, it is necessary to attract fish through hooks such as color, light, swimming shape and sound. How to make fishing lures' life alive, you must achieve the effect of "fake the real thing" by means of delicate bait, so that it is not difficult to lure the fish.

 

1, Pause

 

In order to let bait sink to the expected depth of the fishing shed and lure the fish in the swimming layer, it is necessary to wait for Luya to reach the proper position in a calm and sinking manner. In the process of sinking bait, it is still possible to mix short twitching, shaking, etc., mimicking the creature that sinks and trembles while injured.

 

2, Twitch

 

This action mimics the subtle movements of the bait creature with tiny dithering techniques. For example, if the fish and fry are not under the pressure of natural enemies, the movements that move, move, or fish like shrimps and tigers always advance in a jumping manner. In operation, do not make excessive movements by shaking the tip or short distance (about 5 to 10 cm).

 

3, Jerk

 

When Luya arrives at the target fish swimming layer in the form of stagnation bait, if the sudden bait is used to collect the bait, it will often attract the assault of the target fish. This is because during the feeding process, it fully expresses the small fish discovery. After the big fish, rushed and nervously escaped. The other is the regular bait mode, which is suitable for simulating small rolls, small pumps or some swimming, stopping creatures, and their "intermittent" strokes.

0 comments

Leave a comment

All blog comments are checked prior to publishing